Matching Colour Stained Profiles Available SEE LINK
Available In Rustic Or Select Grade
Pack Size – 2.59m2
£75.15 – £106.68 per m2 Exc Vat
PRODUCT DESCRIPTION
Lavish Baron is our own premium brand One Strip European Oak Engineered flooring which has been finished with LED coloured natural oil. LED is a new finishing process where the flooring is passed through a LED light to dry the oil faster. As a result no additional coat of oil is now required directly after installation. Available in Rustic or Select Grade. Rustic AB, this means you will get knots which have been filled and sanded, the flooring has a natural colour variation. Select Grade means these boards have been hand selected to ensure minimal defects so will look a lot cleaner. The width of the floor is 180mm which is ideal for large rooms. The engineered oak floor has bevels on the long sides only, and comes in fixed lengths which are an extra long 2400mm, each pack contains 6 full length boards or 5 full and 2 half lengths. Having a 4mm wear layer with an overall thickness of 15mm. The base layer is constructed of multi layer birch plywood adding to its quality. The profile is tongue and grooved. We recommend to use a professinal Floor Fitter. Must be fully bonded to the sub-floor or warranty will be void! For regular cleaning of your floor please use Osmo Wash & Care SEE LINK For periodic cleaning please use Osmo Liquid Wax Cleaner SEE LINK Lavish fitting guide for UK warranty 2024
SPECIFICATION
Manufacturer – Lavish Species – European Oak (Quercus Petraea) Grade – Rustic A/B Or Select Grade Colour – Grey/Brown Bevel – 2 Bevel Finish – Natural Oiled Pack Size – 2.59m2 Thickness – 15mm Wear Layer – 4mm Width – 180mm Length – 2400mm Lavish Baron Engineered European Oak 15mm Natural LED Oil
Select Grade is a special order product and cannot be returned, please allow 3 – 4 weeks for delivery.
Lavish Installation Guidlines
We recommend to use a professinal Floor Fitter. Must be fully bonded to the sub-floor or warranty will be void!
IMPORTANT: Before installation, the fitter must check the quality of the boards and should remove defective boards if necessary. If the floor is not of an acceptable quality, please contact your
distributor. The manufacturer is not responsible for the quality of the floor or other costs incurred, if any boards with observable defects are installed. Keep in mind that the wooden floor is a natural product with potential changes in the structure and colour, which are influenced by wood grading. For this reason, the manufacturer is not responsible if
the flooring delivered is not identical to the sample seen when purchasing. Please ensure that the consumer is satisfied with the flooring colour, grading and finish on site before laying.
It is the fitter’s responsibility to notify the distributor of any defects or potential issues as soon as they become apparent.
On-site Environment
Wood flooring is sensitive to changes in the environment, especially humidity. During the summer, when it is warm and moist, the humidity rises. When moisture content rises above 65%, it can cause the wooden flooring to distort. If this happens, you need to eradicate the cause of the increased humidity. Wooden boards can go back to their original dimensions, but you will have to wait till all excess moisture has evaporated from them. In the winter, when the houses are heated, the reverse process takes place, the humidity of the air reduces, and dries out. When humidity drops lower than 45%, wooden flooring gives up some moisture and contracts. When this happens, thin gaps can appear between planks.
Room temperature should ideally be 15-20°C . Before you start installing the STAKI hardwood flooring, make sure that all wet works (i.e. plastering) are finished in the room where the floor will be laid, as this will increase the humidity. If there are building works in the same area, new floors must be covered and protected upon completion. Do not open the packs of flooring until you are ready to install.
Subfloor preparation
Suitable subfloors are concrete, ply or chipboard. The flooring base must be flat (max. 3 mm variation under a 2m straight edge), dry, solid and protected from moisture. Uneven floors must be
corrected using a latex screed only. The moisture content of concrete must not exceed 2%. For heated floors 1.8%, and for plywood 12%. If laying over existing floorboards, it is recommended to fit 4mm ply over the floorboards first, thus allowing for a levelling screed to be applied. If laying on chipboard flooring, it is recommended to apply Taurus R45 primer prior to the adhesive.
Plank flooring
Do not lay the flooring in a regular ‘brickwork’ pattern, wood floors should always be laid to a random pattern. Also adjacent end joints must be at least 250mm apart.
FLOATING INSTALLATIONS – Staki do not offer a warranty on their floors if they are laid floating.
Staki floors must be bonded to the subfloor.
BONDED INSTALLATIONS – Floors are stuck down using Taurus H16 adhesive (H22 if there is underfloor heating). If laying on chipboard or composite flooring, it is recommended to apply Taurus R45 primer prior to the adhesive.
If the customer requires further sound reduction, we recommend fitting over Wakol TS160 3mm Slatted Underlay and Wakol MS262 adhesive. If this method is used, PVA adhesive must be applied to all Tongue and Groove joints
NAIL DOWN INSTALLATIONS – We do not recommend nailing only, there is a possibility that the nails may squeak as the floor expands or contracts. We therefore only recommend nailing if carried out in conjunction with a full stick down.
FITTING OVER JOISTS – Staki 220x20mm planks can be installed over joists. If fitting 180x15mm planks, a suitable subfloor must be installed first. PVA adhesive must be applied to all Tongue and Groove joints. Header joints do not need to be located over joists, although extra support may be necessary under joints dependant on the loading above. Joists should be fixed at no more than 400mm centres. If unsure, speak to our technical department before installing.
Herringbone flooring
All Staki herringbone blocks are supplied unhanded, so you do not need to install left and right hand blocks. When laying the flooring, always work from 3 open planks to ensure an even colour spread. Herringbone floors must be fully stuck down using Taurus H16 adhesive (H22 if there is underfloor heating).
Smoked floors
Smoked floors will display large colour variations, caused by a natural reaction during the smoking process. There will often be batch variations. A hand sample is not sufficient to give an impression of the floor’s overall appearance. Please ensure that the correct amount of flooring is ordered so that the stock supplied will be from the same batch. Always work from a minimum of 3 open packs to ensure a good colour mix. Ensure that the customer is happy with the flooring colour before laying.
Heated subfloors
When installing on a heated base, ensure that the heating is uniformly spread without hot or cold spots. Ensure that the subfloor encapsulating the heating is solid. The temperature of the floor
surface must not exceed 27° C. We recommend checking with the heating supplier that their system is suitable for use with wood flooring.
Floor care and maintenance
STAKI floors are finished with either oil or lacquer. The oil will absorb into wooden surface, unlike varnish, which covers the floor with a thin film. Oiled floors are easier to maintain. You do not have to sand the entire floor space, if you want to repair or freshen up just a small area of the floor. It is enough to sand this area and overcoat with oil. Keep in mind, that the natural floor colour will change when it is covered with oil or varnish. Wood flooring finishing work should be carried out in accordance with the manufacturer's instructions and in compliance with safety requirements. In entrances, floors need more protection, so we recommend installing a matwell by the entry door. We recommend installing felt furniture feet under chairs and tables to reduce the risk of damage to the floors surface.
The manufacturer doesn‘t give a warranty if the installation is carried out using unsuitable tools or materials. Floor installation should only be carried out by experienced professionals.
Delivery Terms For Lavish Flooring
Next day delivery is available on most flooring if ordered before 11.30am, depending on stock availability.
Delivery is two to three working days for Scotland, also there may be an extra charge to remote areas of Scotland. Special order items can take up to three weeks.
You can choose a certain week day that you would like delivery (Monday – Friday), this can be requested at the Checkout page under Additional Information.
We Only Deliver To Mainland UK
We offer free delivery on all orders over £700 plus VAT to mainland UK. If an Artic Wagon is not suitable for delivery, there will be an extra charge.
For orders under this value there will be a charge of £50 plus VAT.
Please note that orders with flooring and accessories may incur compound delivery charges, this is due to the accessories may be coming from another supplier. Please email or call if you have any questions.
All Flooring deliveries are made to “kerbside” at the nearest access point to the delivery address for the delivery vehicle. It is assumed that the delivery address will be accessible by lorry. If there is likely to be a problem, e.g. the road is subject to a vehicle weight or width limit please inform us at the time of order. Deliveries will be made between 8.00 am and 6.00 pm.
If a courier arrives at your address and is unable to deliver on the arranged delivery date because you are not there you will be liable for the re-delivery charge of £110 exc Vat Minimum, depending on the size of your order.
Every effort is made to ensure that your goods are delivered in perfect condition. Please inspect your goods immediately on delivery, as no claims with regard to damaged items can be made after our driver has left the delivery address, unless signed for as damaged on delivery. Goods refused on delivery that are found to be undamaged on return to us will incur the return delivery charge where applicable. In the unlikely event that some of your goods are damaged we will collect and replace the product. Any claims must be made within 7 days of receipt of goods.
No liability can be accepted for costs caused by late deliveries or for any other reason. Therefore we advise against booking trades for installations until goods have been received.
Returns Policy
Under the Consumer Contract Regulations the Customer has the right to return full orders within fourteen days of the Goods being received without giving a reason. Goods returned must be in a saleable ‘as new’ condition and returned in their original packaging. Shrink-wrapped and factory packaged Goods must be returned unopened. In the unlikely event that you wish to return your order, all returns are subject to a 25% re-stocking charge and the customer will be charged for the transport costs of the goods back to the manufacturer from which they came, we will arrange the transport back. We buy direct from the manufacturers who ship on our behalf, we are an Internet Only Business and do not hold any stock or have our own warehouse. Therefore this is the reason the 25% re-stocking charge applies as this is what we get charged from our suppliers. Part orders cannot be returned.
Our supplier/manufacturer will arrange transportation and the customer must pay all costs involved in transporting the Goods back to the warehouse from which they came. The Goods must be insured whilst in transit for the full value of their cost price. Returns made under this provision must be agreed in writing or by email by both parties before the Goods are returned. The Company will not refund the costs of delivery and labour etc. that the Company incurs in supplying the Goods. Once the product has been returned and checked by our suppliers to confirm it is in a resaleable condition, only then will the refund be processed. The refund will be made to the credit or debit card that was originally used to complete the transaction.
This provision is not applicable to ‘special order’ or bespoke items. Any special order or made to order products cannot be returned.
Goods supplied incorrectly entirely through the Company’s fault will be re-supplied at no cost to the Customer.
Return Instructions
If you need to return an item, please email sales@woodflooringsupplies.co.uk with your order number in the title.
You may also like…
Primers & DPM
Wood Flooring Adhesives
Wood Flooring Adhesives