Taurus H22 MS Wood Flooring Adhesive 16kg is a 1 component reduced elasticity modified silane wood flooring adhesive. For the fitting of solid (200mm max width), wide board engineered wooden flooring as well as end grain block and finger parquet. Suitable for underfloor heating. Cures by polycondensation, liberating methanol, under the influence of the ambient humidity. Suitable for underfloor heating, coverage per 16kg tub is approx 14 – 15m2. Open times are 40 minutes, light traffic after 8 hours and full traffic after 24 – 48 hours. Subfloor temparature must be above 15°C.
Subfloor
All site and sub floor conditions must meet relevant country specific standards and a suggested minimum level of DIN18356 would be required. Will adhere to a wide range of materials including wood, concrete, metal and ceramics. All subfloors must be clean, flat, solid, permanently dry and free from cracks, dust, contaminants and substances that prevent adhesion.
A primer is generally not required. Surface crystallization of anhydrite floors must be removed and vacuumed before applying one coat ONLY of Taurus R45 PU Primer. If necessary, cement or gypsum based floors should be mechanically prepared, vacuumed and primed with one coat of Taurus R45 PU Primer before the adhesive is applied. Please ensure all preparation is done in accordance with the manufacturers’ recommendations. After the sub floor is assessed as dust free and conditionally correct, the wood flooring can be adhered directly to the sub floor surface with the adhesive.